Computer cars with poor assembly quality have low accuracy

 All computer car parts that have undergone surface baking, electroplating and other surface treatments have adhesive layers on their assembly joint surfaces (including holes, grooves, planes and screw holes). Need to remove the needle bar seat panel. Careful cleaning and cleaning to ensure that the parts of the computer car are clean is the basis for ensuring the assembly quality and prolonging the service life of the computer car. Need to remove the needle bar seat panel. The parts that need to be refueled and the details of the refueling are as follows: Thread take-up lever gear. Use butter.u3000u3000 

 

Dalian rod and front and back metal parts. Clean with a brush before refueling. Produce better-performing equipment. 2 white oil. The driving shaft driven by the needle bar requires No. Clean up once a week, and remove the needle bar seat panel.The groove of the slide rail of the needle bar seat. Need to use No. Therefore, before assembly, the Must be finished according to the process and technical requirements, and then assembled and deployed; If it is not clean when assembling various shaft parts, it will cause the shaft sleeve to heat up too high and the transmission torque is too heavy.u3000u3000 

 

Rotary shuttle gear. Clean up once a week. 2 white oil. Need to use No. Need to use butter, once a week, remove the needle plate. 2 white oil. Need to use No. Clean up once a week. If the assembly does not meet the specified technical requirements, the computer car will not work normally.Drive chain, refuel once in February and March, use butter. Clean up once a week. In severe cases, it will accelerate wear due to debris and cause serious failures such as 'occlusion', which will affect the overall machine performance. Need computerized embroidery machines Suppliers to use No. The incorrect mutual position between components and mechanisms also affects the performance of the computer car. 

 

Computer cars with poor assembly quality have low accuracy, poor performance, loud noise, heavy torque, and short life; on the contrary, some parts with low accuracy can still be assembled after careful selection and assembly and precise adjustment. 2 white oil.ufeffThe daily maintenance of the computerized embroidery machine includes the following aspects: The sliding part of the needle bar. Especially the shaft sleeves, bearings, oil pumps, and parts containing rotating and swinging fittings should be carefully cleaned.u3000u3000

China Big Embroideries...