China Big Embroideries

 All computer car parts that have undergone surface baking, electroplating and other surface treatments have adhesive layers on their assembly joint surfaces (including holes, grooves, planes and screw holes). Need to remove the needle bar seat panel. Careful cleaning and cleaning to ensure that the parts of the computer car are clean is the basis for ensuring the assembly quality and prolonging the service life of the computer car. Need to remove the needle bar seat panel. The parts that n...

At first glance, the patte looks like a missing stitch. Corduroy is another type of fabric with an uneven surface. The method is to tear off the extra part by hand after embroidering, and then wash with water to completely dissolve all the water-soluble cloth. For example, in leather embroidery, the paper backing acts as a lubricant. In fact, it is not. It is a kind of paper that is thinner than the cut paper. After embroidering, you can tear off the extra part at will.ufeffTypes of backing p...

The thread used for bottoming is too thin or the angle is wrong, and the fabric cannot be fixed well. Because the paper under the fabric is too thin, it can't line up the fabric well. The computerized embroidery patte-making should consider the overall rationality of the needle; if you don’t walk a single needle in a local area, then just go straight to the place far away from the single needle to embroider a large flower, and then retu to use the needle package. ufeffThere are ten ...

Use a multimeter to measure whether the power board transistor M5 malfunctions? If there is any problem: change the transistor of the same model. Use a multimeter to measure the plug 4 and 5 of the socket CZ6 on the power board in the control box, and the exchange voltage should be 63V.   Inspect whether the signal line connection between the main control board and the power board is reliable. If not abnormal: remove the embroidery frame. Use the resistance file of a multimeter to che...