Water-soluble cloth is most commonly used in terry cloth and flannel

At first glance, the patte looks like a missing stitch. Corduroy is another type of fabric with an uneven surface. The method is to tear off the extra part by hand after embroidering, and then wash with water to completely dissolve all the water-soluble cloth. For example, in leather embroidery, the paper backing acts as a lubricant. In fact, it is not. It is a kind of paper that is thinner than the cut paper.

After embroidering, you can tear off the extra part at will.ufeffTypes of backing paper for computerized embroidery machines: Water-soluble cloth is most commonly used in terry cloth and flannel, as a surface lining to prevent wool. The backing is a layer of material laid under the fabric, which stabilizes the stitches and improves the smoothness of embroidery.

When it comes to embroidering special fabrics, such as terry cloth, velvet, blankets or velvet, because the surface is all long hair, it is easy to twist the threads between the woolen threads, and a layer of simplicity is added to prevent the embroidery threads from being entangled.

The use is roughly the same as that of water-soluble cloth, except that the hot melt should be Flat Computerized Embroidery Machines dissolved by heat, such as a roller-type hot press or an iron, and it will never affect the patte or leave any lining.

In addition, some high-priced products will use water-soluble cloth as a backing or surface lining to improve product quality. It is just that the pits on the cloth surface cause the stitches to sink. After the embroidery is completed, the remaining part can be cut off.

China Big Embroideries...